keyboard_arrow_right
Offer

Li ion charger board

25.2V Charger 25.9V Output 29.4V 2A for Hoverboard Suspension Shoes Ebike Scooter 7Series Lithum Li ion Battery DC5.5 x 2.1 x 11mm

Buy li ion charger board
Check Price on Amazon
Buy li ion charger board from Amazon.com

Description:

Product Description
Input: AC 100-240V 50/60Hz 1.2A
Output:29.4V 2A
LED Display
Red:Charging
Green: Charged OK
Working Temp/humidity:-10C-50C,20-90RH
Storage Temp/humidity:-10C-60C,20-90RH
Charger DC PlusDC Optional:DC 5.5 2.1mm
Faster and safer charging with our adapter
Intelligent high-speed charging for most 29.4V versions scooters
Package include:
1 x 29.4V 2A battery charger
1 x DC plug cord

Tangspower has always devoted itself to providing products with excellent quality for the end-users

Use and maintenance of the charger :
1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug.
If you pull the battery plug first while charging, especially when the charging current is large (red light), it is very easy to damage the charger.
2. When the LED light turns green, please continue charging for 2-3 hours.
3. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged.
4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting, which is conducive
to the activation of long-term immobile material in the deep part of the battery. Luminous means that riding the controller battery undervoltage protection action.
5. If your battery has not been used for a long time (2-3 months), please charge the battery before using it. Make sure your battery is not broken.
6.Please use the charger in a dry place in time.
7.When you do not use the charger, do not always connect the power supply.
8.Please confirm your battery, Because it is used to charge the lithium battery. Do not use the charger on the LiFepo4
battery, otherwise the charger will be got incredibly hot.

Buy li ion charger board from Amazon.com
  • Output 29.4V, World Wide Input Voltage 100-240VAC 50/60Hz
  • 105 Output capacitor, global applicable AC Input voltage.100 full load aging test, Internal EMI filter, ripple minimum.The precision current between 0.1A, the voltage tolerance is 0.1V, absolutely not virtual marking.
  • The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable.
  • The charger protected: Short circuit protection/ over current protection/ over voltage protection; red light -- charging, green light -- charge OK, it stop automatically when the battery is full.
  • Replace your broken charger or add an extra charger to charge in 2 locations without taking the original charger with you






Buy li ion charger board from Amazon.com


36V Charger Output 42V 2A Input 100-240 VAC Lithium Li-ion Li-poly For 10Series Hover Board Battery

Buy li ion charger board
Check Price on Amazon
Buy li ion charger board from Amazon.com

Description:

INPUT SPEC:AC100-240V 50/60HZ
charging voltage: DC42V
charging current: 2A
Charging mode: CC-CV
charge indicator:Red:Charging Green: Charged OK
Charger port: DC5.5mm*2.1mm Compatible with DC 5.5mm*2.5mm
product size:132*57*32MM
Cable length: 39.4 In / 100 CM
security protection: OVP/OCP/ Overload protection/ Short-circuit protection
Packing:
42v 2a battery charger*1
US plug cable*1(If you receive the EU plug cord, please contact us)
Tangspower has always devoted itself to providing products with excellent quality for the end-users.
If you are not satisfied with our product, let us know and you will be offered a full refund or replacement.
Use and maintenance of the charger :
1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug.
If you pull the battery plug first while charging, especially when the charging current is large (red light), it is very easy
to damage the charger.
2. When the LED light turns green, please continue charging for 2-3 hours.
3. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged.
4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting,
which is conducive to the activation of long-term immobile material in the deep part of the battery. Luminous means that
riding the controller battery undervoltage protection action.
5. If your battery has not been used for a long time (2-3 months), please charge the battery before using it.
Make sure your battery is not broken.
6.Please use the charger in a dry place in time.
7.When you do not use the charger, do not always connect the power supply.
8.Please confirm your battery, Because it is used to charge the lithium battery. Do not use the charger on the LiFepo4
battery, otherwise the charger will be got incredibly hot.

Buy li ion charger board from Amazon.com
  • Output 42V, World Wide Input Voltage 100-240VAC 50/60Hz
  • 105 Output capacitor, global applicable AC Input voltage.100 full load aging test, Internal EMI filter, ripple minimum. The precision current between 0.1A, the voltage tolerance is 0.1V, absolutely not virtual marking.
  • The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable.
  • The Charger protected: Short circuit protection/ over current protection/ over voltage protection; red light -- charging, green light -- charge OK, it stop automatically when the battery is full.
  • Replace your broken charger or add an extra charger to charge in 2 locations without taking the original charger with you






Buy li ion charger board from Amazon.com


Lithium Battery Charging Board,14S 50V 30A Battery Cell Protection Board BMS PCB Protection Board Charger Module, Li-ion Lithium Protection Board

Buy li ion charger board
Check Price on Amazon
Buy li ion charger board from Amazon.com

Description:

Features:
1. Adopt intelligent lithium cell management IC for fast and safe charging.
2. With balance charging to balance the characteristic of each battery in battery pack and prolong battery life.
3. Provide a variety of protection functions including overcharge, overdischarge, overcurrent and short circuit protection.
4. Equipped with thickened aluminum fin to achieve quick heat dissipation.
5. This product has gone through load and aging test for quality assurance.

Specification:
Battery type: 3.7V ternary cell, lithium manganate cell, lithium cobalt cell
Applicable voltage: 50V
Charge current: 28A
Discharge current: 30A
Max continuous working current: 28A
Overdischarge protection voltage: 2.6V
Overcharge protection voltage: 4.25V
Balance voltage: 4.2V
Temperature protection: Discharge 75, charge -7
Weight: Approx. 51g / 1.8oz

Package list:
1 * Lithium Battery Protection Board

Buy li ion charger board from Amazon.com
  • ADOPTS WITH LITHIUM CELL MANAGEMENT OFFERS FAST AND SAFE CHARGING--Adopt intelligent lithium cell management IC for fast and safe charging
  • BALANCING CHARGING EXTENDS BATTERY LIFE--With balance charging to balance the characteristic of each battery in battery pack and prolong battery life
  • MULTI-OVER PROTECTION ENSURES SAFETY USE--Provide a variety of protection functions including overcharge, overdischarge, short circuit, and temperature protection
  • EQUIPPED WITH ALUMINUM FIN ENSURES QUICK HEAT DISSIPATION--Equipped with thickened aluminum fin to achieve quick heat dissipation
  • MANY TIMES TESTING ENSURES HIGH QUALITY--This product has gone through load and aging test for quality assurance








Buy li ion charger board from Amazon.com


Anmbest 5PCS 1S 3.7V 4A 18650 Charger PCB BMS Protection Board for Li-ion Lithium Battery Cell

Buy li ion charger board
Check Price on Amazon
Buy li ion charger board from Amazon.com

Description:

With over charge, over discharge, over current, short circuit protection function, for a variety of different shapes of 3.7V capacity lithium batteries. Well-designed, comprehensive test. Compact size, suitable for many requirements of high integration, low cost occasions, can meet the performance requirements of many aspects, to ensure the absolute safety of the battery group.

Specifications:
Charging voltage:4.2v
Over Charge voltage:4.25v plus or minus 0.05v
Over Discharge voltage: 2.45v plus or minus 0.05v
Max Working current:4A
Max peak current:5A
Working temperature:-40 50 Celsius
Storage Temperature:-40 80 Celsius
Internal Resistance:MOSPET less than 40m ohm
Life cycle:more than 30000 hours
Short Circuit Protection: Protectable, Delayed self-recovery
Size:35 mm4mm2.2mm/ 1.38 0.160.09(L x W x H)

Suitable for:
For nominal voltage 3.7V lithium battery(Including 18650,26650, lithium polymer batteries)

Attention:
1.Strictly according to the diagram wiring: B: connected battery positive, B-: connect to battery negative, P: connection charge / discharge positive, P- connection charge / discharge negative, Otherwise it will cause damage to the chip.
2.After connection,it need to first charge activation, then will have the output.

Package inlcuded:
5x 1S lithium Battery Protection Board

Buy li ion charger board from Amazon.com
  • HIGH-ACCURACY, HIGHLY DURABLE: High-accuracy voltage detection circuit, fine workmanship and durable, Effective life greater than 50000 hours.
  • MULTIPLE PROTECTION: Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection; A combination of 4 safety features that work together to provide ultimate protection for your devices, your chargers and most importantly:you.
  • LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption.
  • WIDELY APPLICATIONS: Use for variety of capacities and various shapes 3.7V lithium batteries,Massager battery pack, LED light backup power supply, solar street light battery pack, monitor standby power supply, etc.
  • ATTENTION: Strictly according to the diagram wiring: B: connected battery positive, B-: connect to battery negative, P: connection charge / discharge positive, P- connection charge / discharge negative, Otherwise it will cause damage to the chip. After connection,it need to first charge activation, then will have the output.





Buy li ion charger board from Amazon.com


3S 12V 18650 10A BMS Charger Li-ion Lithium Battery Protection Board Circuit Board 10.8V 11.1V 12.6V Electric

Buy li ion charger board
Check Price on Amazon
Buy li ion charger board from Amazon.com

Description:

Specification: Brand new Size: approx.50x16x1mm Maximum discharge current: 10A Overcharge detection voltage: 4.25-4.35V0.05V Over-discharge detection voltage: 2.3-3.0V0.05V Maximum working current: 5A-8A Transient current: 9A-10A Operating temperature: -4050 Storage temperature: -4080 Quiescent current: 6uA Internal resistance: 60m Service life: 30,000 hours Feature: Short circuit protection. Overcharge protection. Over-discharge protection. Overcurrent protection. Can be applied to various 3.7V lithium core. Compact size and lightweight. Fine workmanship and durable. Ensure the security of battery pack. Suitable for: 10.8V (Rated voltage of polymer battery) 11.1V (18650 or 3.7V lithium battery rated voltage) 12.6V (Lithium battery full charge voltage) Note: Please allow 1-5mm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same. Package inlcude: 1 x lithium Battery Protection Board

Buy li ion charger board from Amazon.com
  • Reland Sung


Buy li ion charger board from Amazon.com


Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs LCD Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors Power Supply 01435

Buy li ion charger board
Check Price on Amazon
Buy li ion charger board from Amazon.com

Description:

* NiMH/NiCD 115 cells ( 1.2v to 18v) * Li-PO/Lithium Ion 16 series ( 3.7v to 22.2v) * Li-Fe 16 series * Sealed Lead Acid (SLA) * Charge your NiMH/NiCD Receiver Packs: 3.6v, 4.8v, 6v, or 9.6v * Charge your LiFE Packs: 6.6v * Charge your normal NiMH/NICD Packs: 7.2v, 8.4v, 9.6v, 10.8v, 12v * Charge your High Performance LIPO Packs: 7.4v, 11.1v, 14.8v, 18.5v * Charge your Airsoft NiMH/NICD Packs: 8.4v, 9.6v, 12v * Charge your Airsoft LIPO/LiFe Packs Future proof yourself for any new battery pack or upgrades, instead of having constantly buy 1 charger for each type of pack. Note: to charge Mini Airsoft packs, you need a Standard Tamiya to Mini Tamiya Connector which is sold separately. Charger Specifications: DC 11V15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can also select a extra Wall Plug AC-DC12V/5A Switching Power as a power source. Specification Operating voltage DC 1118 volts AC 100240V, 50/60Hz Charge/discharge power max. 50/5 Watts Pb 220V Charge current 0.1 to 5.0A Discharg current 0.1 to 1.0A No. of cycle 1 to 5 times Dimension 130x85x33 mm< User's setting-up parameters Battery voltage type LiIo:3.6V, LiPo:3.7V, LiFe:3.3V NiCd Delta-peak voltage sensitivity 1 to 20mV NiMH Delta-peak voltage sensitivity 1 to 20mV Battery temperature cut-off 20 to 80C or OFF Waiting time between charge/discharge 1 to 60 min. Integral timer limit for safety 10 to 720 min.or OFF Maximum charging capacity limit for safety 10 to 9990mAh or OFF Key beep and buzzer sound ON/OFF Input DC power low alert 10 to 11V ###Please do NOT use this charger with any pack that doesn't have a built-in protection circuit board/module (PCB/PCM)

Buy li ion charger board from Amazon.com
  • BATTERY VARIETY CHARGING - Have the Tenergy TB6-B balance charger/discharger and power supply for all of your battery pack types. Use with NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs.
  • BONUS ACCESSORIES - The AC balance charger comes with octopus multi-charging harness with tamiya, mini tamiya, JST, HiTec, EC3, Deans connectors to be compatible with many charging connectors. Package also comes with a power supply.
  • WIDE VOLTAGE COMPATIBILITY - Use the battery pack balance charger on NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. LiPO/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. SLA 2V-20V.
  • MULTIPLE FUNCTIONS - More than a regular digital balance charger, Tenergy TB6-B comes with features like Li-ion and LiPO balancing, fast charging, data storage, cyclic charging and discharging and much more for all of your battery packs.
  • EASY TO READ - View all charging statuses and settings on the Electronic Balance Charger LCD screen as you navigate the modes and selections. Buy with confidence, your charger includes a 12-month warranty.






Buy li ion charger board from Amazon.com


Deruicent Flat TOP 18650 Lithium Rechargeable Batteries 2600mAh 3.7V (2 Pack) and Battery Charger for Li-ion 18650 14500 18490 18350 17670 17500 16340,Ni-MH/Ni-Cd: A,AA,AAA,AAAA

Buy li ion charger board
Check Price on Amazon
Buy li ion charger board from Amazon.com

Description:

Features:

1.Capable of charging 2 batteries simultaneously;

2. Each of the two battery slots monitors and charges independently;

3. Optimized charging design for IMR batteries;

4. Built-in LCD panel clearly displays charging parameters and progress;

5. Automatically detects battery power status and selects the appropriate voltage and charge mode;

6. Automatically stops charging when complete;

7. Features Over-charge prevention to protect batteries;

8. Features temperature monitoring to prevent overheating;

9. Made from Durable ABS.

Specifications:

. Charger

1.For Ni-MH/Ni-Cd Battery

Input: 5V 1A

Output: 450mA*2 1W

2.For Li-ion Battery

Input: 5V 2A

Output: 1000mA*2 4W

3. Compatible with Li-ion batteries 18650 18490 18350 17670 17500 16340(RCR123), 14500 Ni-MH/Ni-Cd A AA AAA batteries and 3.7V lithium battery and so on

4. Dimensions: 5.0 inX2.6inx1.4in

5. Weight: 0.45Lb

6.Compliant Standards: FCC, CE, ROHS

NOTICE: The charger has reverse connection protection. If the battery was put into the charger reverse, the screen of charger will splash.

. Batteries:

Capacity: 2600mah

Voltage: 3.7v

CAUTION:

1. Charge at room temperature;

3. Please do not charge the unsuitable batteries, otherwise may damage the batteries and charger;

4. Keep charger away from water and excessive dust;

5. Children should be use the charger accompained by an adult;

6. Do not disassemble or operate the charger and batteries if it is damaged in any way.

Packing Content:

1 X Deruicent Smart Charger

1 X Micro-USB Cable

1 X User Manual

Buy li ion charger board from Amazon.com
  • FLAT-TOP 2600mah Real Capacity 18650 Batteries: Integrated with IC Protective Board, avoiding overcharge and discharge, protecting your toys, flashlights, headlamps,laser pointers or other tools from damage.
  • Micro-USB Multifunctional Charger: It can be charged by your laptop, power bank, car charger or AC adapter. It achieves the goal that you can charge the batteries anywhere.
  • Intelligent Charging Function: The charging display screen NOTICE: A thin protective film is sticked on the power display screen. You can choose to rip it off or just keep itwill flash when the batteries put in a wrong direction. The charger can also intelligently recognize battery's type and then choose corresponding charging mode automatically.
  • Charger Fits Multiple Types Batteries: It is compatible with Lithium Battery:14500 18490 18350 17670 17500 16340; Ni-MH/Ni-Cd: A,AA,AAA,AAAA
  • 2 Charging Slots Work Individually: You can charge different types of batteries in 2 slots at the same time. The charger will intelligently recognize battery's type and then choose corresponding charging mode automatically.





Buy li ion charger board from Amazon.com


3 Sets Kits 3.7V Li-ion 18650 Lithium Lipo Battery Charging Board 5V USB Step UP Module

Buy li ion charger board
Check Price on Amazon
Buy li ion charger board from Amazon.com

Description:

Battery Charging Moduleïš
1.Module type: Micro usb input Lipo Battery Charging Board
2.Charge mode: Linear charging
3.Charge Current: >=1A
4.Charge precision: 1.5
5.Input voltage: 4.5V-5.5V
6.Full charged voltage: 4.2V
7.Led indicator: Red is charging, Blue is full charged
8.Input interface: Mirco USB
9.Work temperature:-10â"85â"
10.Battery discharge protection voltageïš2.5V
11.Battery overcurrent protection currentïš3A
12.Sizeïš 26*17 MM
13.This module is used for 18650/lithium Polymer charging and Protection.
USB Step Up Board:
1 Ultra-small PFM Control onboard DC / DC boost controller chip.
2. Input voltage: DC 0.9V-5V
3. output:DC 5V 0.6A
4. On-board with working indicator light.
5. PCB size: 29x18.8x8.5 (mm)

Package include:
3x TP4056 battery charing protection board
3x USB 5V 0.6A Step Up Board
5ft wire cable
3x on/off switch

Buy li ion charger board from Amazon.com
  • Use these kits to Homemade A DC 5V USB Rechargeable Power Supply
  • Comes with 3Pcs on /off switches and 5ft cable
  • It can be used for voltage 3.6 3.7V, etc. 18650, polymer and other lithium battery
  • With red green battery LED indicator
  • Micro USB input.USB output interface, used for mobile phones, Ipad, MP3, PSP, toy ,etc. charging power supply DIY.




Buy li ion charger board from Amazon.com


Anmbest 2PCS 4S 14.4V 14.8V 16.8V 5A 18650 Charger PCB BMS Protection Board for Li-ion Lithium Battery Cell

Buy li ion charger board
Check Price on Amazon
Buy li ion charger board from Amazon.com

Description:

With over charge, over discharge, over current, short circuit protection function, for a variety of different shapes of 3.7V capacity lithium batteries. Well-designed, comprehensive test. Compact size, suitable for many requirements of high integration, low cost occasions, can meet the performance requirements of many aspects, to ensure the absolute safety of the battery group.

Specifications:
Over Charge Voltage:4.25-4.35v0.05v
Over Discharge Voltage: 2.3-3.0v0.05v
Upper Limit Operating Current: 4-5A
Max Peak current: 6-8A
Max instantaneous current: 12A
Working Temperature: -4050 Celsius
Storage Temperature:-4080 Celsius
Static current: less than 6uA
Life cycle: more than 50000hours
Resistance: less than 45m
Charging Voltage: 16.8-17V
Short circuit protection: Can be protected, charge recovery required
Size: 67mm x 16mm x 1mm/ 2.64 0.630.04(L x W x H)

Suitable for:
14.8V (Li-ion 18650 or li-ion battery rated voltage)
16.8V (Li-ion battery full charge voltage)
14.4V ( Lipo battery pack rated voltage)

Attention:
Strictly according to the diagram wiring: B: connected battery positive, B1: the connect point between battery 1 and battery 2, B2: connect the point between battery2 and battery 3 , B3: Connect the point between battery 3 and battery 4, B-: connect to battery negative end , P: connection charge / discharge positive, P-: connection charge / discharge negative. Otherwise it will cause damage to the chip.
Do not mix the good battery and poor battery to use.
The internal resistance of 3 battery capacity are closer will be better.

Package inlcuded:
2x 4S lithium Battery Protection Board

Buy li ion charger board from Amazon.com
  • HIGH-ACCURACY, HIGHLY DURABLE: High-accuracy voltage detection circuit, fine workmanship and durable, Effective life greater than 50000 hours.
  • MULTIPLE PROTECTION: Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection; A combination of 4 safety features that work together to provide ultimate protection for your devices, your chargers and most importantly:you.
  • OW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption.
  • MWIDELY APPLICATIONS: Use for variety of capacities and various shapes 3.7V lithium batteries,Massager battery pack, LED light backup power supply, solar street light battery pack, monitor standby power supply, etc.
  • ATTENTION: Strictly according to the diagram wiring: B: connected battery positive, B1: the connect point between battery 1 and battery 2, B2: connect the point between battery2 and battery 3 , B3: Connect the point between battery 3 and battery 4, B-: connect to battery negative end , P: connection charge / discharge positive, P-: connection charge / discharge negative. Otherwise it will cause damage to the chip. Do not mix the good battery and poor battery to use.





Buy li ion charger board from Amazon.com


Comidox 2Pcs 3S 20A Li-ion Lithium Battery Protection Board 18650 26650 Charger PCB BMS Protection Board 12.6V Cell Module-AUTO Recovery

Buy li ion charger board
Check Price on Amazon
Buy li ion charger board from Amazon.com

Description:

Note:
Successful start of the drill requires three 15C-20C power batteries, or six 10C-15C power batteries (ordinary 18650 can not start the drill)
The 0V and 12.6V connecting wires use copper wires of 2mm2 or more, and the shorter the length, the better. Strictly follow the diagram wiring 0V, 4.2V, 8.4V, 12.6V, do not intentionally short circuit.
When using a brush motor type load, a capacitor (10uF-1000uF) must be connected in parallel with the positive and negative terminals of the motor to prevent the reverse spike voltage generated by the motor from interfering with the protection board or breaking through the MOS tube.
When connecting 3 sets of batteries in series, please ensure that the voltage of each set of batteries is the same. If they are different, please fill each set of batteries separately and use them in series. In the discharge test, the battery with a faster voltage drop is a poor battery.
Do not mix good battery and poor battery. The capacity/internal resistance of the three groups of batteries is as close as possible! (The effect of 2 good batteries 1 poor battery = 3 poor battery usage)

We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.

Package Includes: 2Pcs

Buy li ion charger board from Amazon.com
  • Scope of application: Lithium batteries with nominal voltage of 3.6V and 3.7V (including 18650, 26650, polymer lithium batteries)
  • Size: 59*20*3.4mm, weight: 4.3g
  • Charging voltage: 12.6V - 13.0V
  • Continuous discharge current (upper limit): 20A (if the heat dissipation environment is not good, please reduce the load current), continuous charging current (upper limit): 10A
  • Applicable electric drill: It is suitable for electric drills with starting current below 40A and power below 65W.





Buy li ion charger board from Amazon.com


Li ion charger board