keyboard_arrow_right
Offer

Desoldering wick flux

Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10", 50ft.

Buy desoldering wick flux
Check Price on Amazon
Buy desoldering wick flux from Amazon.com

Description:

ITW CHEMTRONICS 10-50L BRAID, DESOLDERING, ROSIN, 50FT

Buy desoldering wick flux from Amazon.com
  • Price For: Each Braid Material: Copper Width: 2.5mm Length: 50ft Braid Color: Blue Leaded Process Compatible: Yes Roll Length: 50ft RoHS Compliant: Yes
Buy desoldering wick flux from Amazon.com


NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

Buy desoldering wick flux
Check Price on Amazon
Buy desoldering wick flux from Amazon.com

Description:

NTE Solder Wick is made from fine copper wire woven together with a no-clean flux formula added to it to increase absorption.

Buy desoldering wick flux from Amazon.com
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • 100 copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Available with standard or anti-static bobbins

Buy desoldering wick flux from Amazon.com


MG Chemicals Desoldering Braid #1 Fine Braid Super Wick with RMA Flux, 5' Length x 0.025" Width , White

Buy desoldering wick flux
Check Price on Amazon
Buy desoldering wick flux from Amazon.com

Description:

Any place you can put solder in, you can take it out with Super Wick. Remove the most expensive circuitry with confidence. Just lay the Super Wick on the soldered joint, apply tip of soldering iron to top-side for one second, and lift iron and Super Wick together to leave a clean connection ready for component removal or replacing. Super Wick is pure copper, specially woven wound on a pocket size spool with pressurized periphery. ROHS Compliant.

Buy desoldering wick flux from Amazon.com
  • Oxide-free clean copper
  • Static free bobbins
  • Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
  • Manufactured under SPC guidelines
  • Designed to leave a residue that is environmentally safe
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #144208


Buy desoldering wick flux from Amazon.com


Vastar Solder Wick, 3 Packs Desoldering Wick, Solder Braid 2.5mm Width, 1.5m (5ft) Length

Buy desoldering wick flux
Check Price on Amazon
Buy desoldering wick flux from Amazon.com

Description:

Vastar desoldering wick is high quality desoldering braid with unique, no clean flux with a size of 0.10"W (2.5mm) x 5"L (1.5m), 0.4 oz. (11g).
The solder wick can clean some small or hard to reach areas, which will be a great accessory to remove extra solder.

Package included:
3 x Vastar Desoldering Wick
Warranty:
18-month warranty. For any question, please feel free to contact us. We will get back to you within 24 hours.

Buy desoldering wick flux from Amazon.com
  • High quality desoldering braid
  • Unique no clean flux for easy to use
  • Pure oxygen free copper wire
  • Geometrically-precise weave
  • Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz



Buy desoldering wick flux from Amazon.com


MG Chemicals #3 No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length, Green

Buy desoldering wick flux
Check Price on Amazon
Buy desoldering wick flux from Amazon.com

Description:

No clean super wick. Flux residue is non-conductive and non-corrosive. Static free bobbins. Flux residue remaining on board does not have to be cleaned. High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III. ROHS Compliant.

Buy desoldering wick flux from Amazon.com
  • No clean super wick
  • Flux residue is non-conductive and non-corrosive
  • Static free bobbins
  • Flux residue remaining on board does not have to be cleaned
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374

Buy desoldering wick flux from Amazon.com


Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

Buy desoldering wick flux
Check Price on Amazon
Buy desoldering wick flux from Amazon.com

Description:

TABIGER Solder Sucker & Solder Wick
It's a must-have tool for electronics kit, you can use them togethersolder sucker for large amounts, while the solder wick used in small, hard to reach areas.

How to Use the Solder Sucker:
Step 1: Press the plunger down until you hear a click sound;
Step 2: Heat up solder around item to be removed by using a soldering iron;
Step 3: When the solder is liquid , place the tip of the solder sucker next to the liquid and press press the trigger;
Step 4: Repeat this process if necessary.

How to Use the Desoldering Wick:
Step 1: Place the wick over the solder you need to be removed and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed.

Package Included:
1* Solder Sucker
2* Solder Wick

Buy desoldering wick flux from Amazon.com
  • One-handed solder sucker with powerful suction Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • Desoldering Wick with copper braid 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • ABS body with non-slip sponge and Nylon nozzle desoldering pump The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 3-in-1 Solder Removal Tool 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • Widely used Solder Remover The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.






Buy desoldering wick flux from Amazon.com


AUSTOR 1 Piece Desoldering Sucker and 6 Pieces Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool

Buy desoldering wick flux
Check Price on Amazon
Buy desoldering wick flux from Amazon.com

Description:


AUSTOR 7 Pieces Solder Sucker & Desoldering Wick kit, including 1 Piece Desoldering Sucker and 6 Pieces Solder Braid Solder Wick

Product instruction
How to Use the Solder Sucker
Product instruction
How to use the solder sucker
First: press down the plunger until it is locked with the sucker.
Second: heat up the solder until it become liquid.
Next: place the solder sucker near to the liquid,then press the button.
Last: repeat this process if needed.

Note
1. Don't take apart the nylon suction nozzle when you recive the desoldering sucker first time to prevent escapes.
2. Don't forget to put the black elastic back on the sucker after you pour the scruff out of it, then screw the nylon suction nozzle to ensure the sucker can be normal use.
3. If you find the double sping device no spring pressure when pressing the plunger, check whether the nylon suction nozzle had been screw tightly.

How to use the solder wick
First: place the wick over the solder which you want to remove.
Second: heat the wick and sold area by the soldering iron.
Next: remove the wick once the solder has been absorbed.
Last: cut off the wick you have used, repeat this process if needed.

Specifications 
Desoldering Pump
Material: ABS
Length: 206mm
Diameter: 20mm
Solder Wick
Material: Copper with rosin
Wideth: 2.0mm/2.5mm/3.0mm
Length: 1.5m
Diameter: 55mm
Package include
1 * Desodering Pump
2 * Solder Wick 1.5M x 2.0mm
2 * Solder Wick 1.5M x 2.5mm
2 * Solder Wick 1.5M x 3.0mm

Product Warranty

All Austor products supply 45 days money-back & 18-month warranty. Any questions you have, please don't hesitate to contact us. We will get you back within 24hours.

Buy desoldering wick flux from Amazon.com
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size






Buy desoldering wick flux from Amazon.com


Aven 17542 Desoldering Wick, 2.5mm Width, 5' Length (2 Pack)

Buy desoldering wick flux
Check Price on Amazon
Buy desoldering wick flux from Amazon.com

Description:

High quality desoldering braid

Buy desoldering wick flux from Amazon.com
  • Save when you buy the 2 pack!
  • High quality desoldering braid
  • Unique no clean flux
  • Pure oxygen free copper wire
  • 0.1"L x 5'L
Buy desoldering wick flux from Amazon.com


MG Chemicals Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width, Blue

Buy desoldering wick flux
Check Price on Amazon
Buy desoldering wick flux from Amazon.com

Description:

Any place you can put solder in, you can take it out with Super Wick. Remove the most expensive circuitry with confidence. Just lay the Super Wick on the soldered joint, apply tip of soldering iron to top-side for one second, and lift iron and Super Wick together to leave a clean connection ready for component removal or replacing. Super Wick is pure copper, specially woven wound on a pocket size spool with pressurized periphery. ROHS Compliant.

Buy desoldering wick flux from Amazon.com
  • Oxide-free clean copper
  • Static free bobbins
  • Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
  • Manufactured under SPC guidelines
  • Designed to leave a residue that is environmentally safe
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #144207
Buy desoldering wick flux from Amazon.com


Aven 17542 Desoldering Wick, 2.5mm Width, 5' Length

Buy desoldering wick flux
Check Price on Amazon
Buy desoldering wick flux from Amazon.com

Description:

Desoldering braid (wick) is a copper braid used in the rework and repair of printed circuit boards, computers, cell phones, or other electronics. Our desoldering wick is made from oxygen free copper, lets you easily remove the extra solder from components or pads on the circuit board. Just press the braid onto the connection with a hot iron and the solder wicks up into the braid.

Buy desoldering wick flux from Amazon.com
  • 0.1"L x 5'L
  • High quality desoldering braid
  • Unique no clean flux
  • Pure oxygen free copper wire

Buy desoldering wick flux from Amazon.com


Desoldering wick flux